Guest blogger: DIY ikat rug tutorial

EDITOR’S NOTE: I’m so excited to have a guest blogger this week! Risa of Restless Risa used some of our gorgeous ikat fabric to make an amazing and EASY rug! She shares her tutorial here — from here on out, it’s in her voice!
— Robyn
———————————————————————————————–

Hi, This is Risa from Restless Risa. I am super excited to be here today! I love party planning, and finding new projects and crafts to entertain my kids. I love thrift shops, DIY projects, baking, cooking, and sewing. I also love getting a DIY high from decorating my house on the cheap! Come over and see me!

Would you believe me if I told you I made the rug in the picture, and it only took about two hours? I am in LOVE! It is my new favorite thing.I have been wanting a rug for my formal living room for quite a while now, and have been crazy about the ikat (pronounced, ee-kot) pattern. These rugs are all over the place, but have a very lofty price tag.
This Martha Stewart rug from gluefier is $468.Ikat rugs in Pottery Barn start at $999.

The way I feel about it is: Ikat is very trendy and I love it now, but don’t want to make an investment in something that I may not be crazy about two years down the road. I saw a tutorial online about how to make a rug, using fabric, so I thought I would give it a try.

Supplies

(Click fabrics for direct links for purchase at Warehouse Fabrics Inc.)

Iskander Lime

Canvas drop cloth

Rug gripper

Spray adhesive
This fabric is called Iskander Lime, and it is fabulous! I ordered 2 yards, equaling $32. Make sure you get at least a medium weight upholstery fabric. I was also sure to use a fabric with a large repeat. This will give your rug a more high end feel.You will also need three products from Home Depot:
Painter’s drop cloth $10.98
5ft x 8ft rug gripper $22.97
Spray adhesive $5.77So, the whole thing costs around $72

The process

The first thing you need to do is iron. I spent nearly an hour on this part! You will want the fabric to be as smooth as it can be. I left it on my railing while I prepped everything.
Lay the rug gripper out on a flat clean surface.
Lay the painter’s canvas on top of the gripper.
Lay the fabric on top of the canvas. I laid mine so the salvage edge barely hung over the canvas, so that I could turn and sew it to finish the edges.
It should look like this.
Cut the excess around the fabric.
Two of the sides will look like this.
You will need to fold the fabric in half, and cut the base in enough that the  edges of the upholstery fabric will wrap nicely around the base when it’s time to sew the edges to finish the project.
Now it’s time to start spraying the adhesive on. Fold your fabric in half, and start spraying a 6 inch section near the folded edge. Spray on the canvas. Don’t spray too much. Use your hand to smooth out the fabric layers.
Work your way down, constantly smoothing from the center to the outer edges.
After you have finished the first layer, you can do the same for the next layer, but spray on the canvas instead of the gripper. My gripper moved a bit with the smoothing, and probably because of the slant of my driveway.
Next, you get to turn the edges. The tutorial I read before recommended pinning, but I didn’t actually need to, because of the spray adhesive making it stick on its own!
I had a hard time figuring out how to sew the edges, because of the scale and weight of the rug. I ended up rolling the rug, and setting the rolled end on the chairs next to me, and in my lap. I am not going to lie. It was hard to push it through the machine, because of the gripper. I did break one needle on a corner.
 Next time, I would sew it with the fabric against the table instead of the gripper, because it runs much more smoothly through the machine. I sewed an extra line of stitching around the edge.I wouldn’t recommend this rug for high pile carpets. I think it would do best on hard floors, like wood, tile or laminate, and it works well for low pile carpet.

Other views – Here’s how it looks in my house!!! What do you think?

(Click for bigger views)